Please wait a minute...
兴发pt登录学报,2020,37(11):70-73https://doi.org/10.16039/j.cnki.cn22-1249.2020.11.015
本期目录|过刊浏览|高级检索 |
单向弯曲关节结构功能和静力学性能研究
孙国栋
北华大学 机械工程学院,吉林 吉林 132021
Study on Structural Function and Static Properties of Unidirectional Bending Joint
SUN Guodong
下载:PDF(2188KB)
输出:BibTeX|EndNote(RIS)
摘要

采用伸长型人工肌肉研制了一种单向弯曲关节。采用理论与实验结合的方法,分析了关节弯曲角度与气压关系,可知关节呈现拟圆弧状弯曲。分析了两种关节的弯曲角度与夹持力,当气压为0.4 MPa时,双驱单向弯曲关节最大夹持力为21.11 N,单驱单向弯曲关节的最大夹持力为12.38 N;气压为0.25MPa时,双驱单向弯曲关节弯曲角度为235.4°,气压0.35MPa时,单驱单向弯曲关节弯曲角度可达到239.1°。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
孙国栋
关键词:单向弯曲关节关节结构静力学
Abstract:

A kind of unidirectional bending joint was developed by using elongated artificial muscle. The relationship between the joint bending angle and the air pressure was analyzed by combining theory with experiment. When the air pressure is 0.4 MPa, the maximum clamping force of dual drive unidirectional bending joint is 21.11 n, and that of single drive unidirectional bending joint is 12.38 n; when the air pressure is 0.25 MPa, the bending angle of dual drive unidirectional bending joint is 235.4 ° and that of single drive unidirectional bending joint can reach 239.1 ° when air pressure is 0.35Mpa.

Key words:unidirectional bending jointjoint structurestatics
出版日期:2020-11-25发布日期:2020-11-25整期出版日期:2020-11-25
ZTFLH: TH 138.5
引用本文:
孙国栋. 单向弯曲关节结构功能和静力学性能研究 [J]. 兴发pt登录学报, 2020, 37(11): 70-73.
SUN Guodong. Study on Structural Function and Static Properties of Unidirectional Bending Joint . Journal of Jilin Institute of Chemical Technology, 2020, 37(11): 70-73.
链接本文:
http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2020.11.015http://xuebao.jlict.edu.cn/CN/Y2020/V37/I11/70
[1] 刘开勇, 杨克, 时菌.一种全自动山楂去核机的设计[J]. 兴发pt登录学报, 2018, 35(9): 46-51.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

Shared
Discussed