Please wait a minute...
兴发pt登录学报,2020,37(11):46-50https://doi.org/10.16039/j.cnki.cn22-1249.2020.11.010
本期目录|过刊浏览|高级检索 |
基于CATIA的某型叶轮数控加工与仿真优化研究
钟佳诚**,户凤荣*
兴发pt登录 航空工程学院, 吉林 吉林 132022
A Precision Approach to Optical Power Test
ZHONG Jiacheng**,HU Fengrong*
下载:PDF(3095KB)
输出:BibTeX|EndNote(RIS)
摘要

叶轮是发动机核心部件,由于其整体形状结构复杂,是具有代表性的难加工零件,一般主要采用五轴加工。本文利用CATIA软件对某型叶轮进行三维建模,优化刀具加工轨迹,生成后处理程序,再利用VERICUT模拟加工,最终证明CATIA与VERICUT结合加工复杂零件的方法可行。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
钟佳诚
户凤荣
关键词:叶轮CATIA仿真加工五轴加工
Abstract:

Impeller is the core part of the engine. Because of its complex shape and structure, it is a typical difficult to machine part. Generally, five axis machining is used. In this paper, CATIA software is used for 3D modeling of a certain type of impeller, the tool path is optimized, the post-processing program is generated, and then VERICUT is used to simulate machining. Finally, it is proved that the method of combining CATIA with VERICUT to process complex parts is feasible.

Key words:mpellerCATIASimulation machiningFive axis machining
出版日期:2020-11-25发布日期:2020-11-25整期出版日期:2020-11-25
ZTFLH: TP15
引用本文:
钟佳诚, 户凤荣. 基于CATIA的某型叶轮数控加工与仿真优化研究 [J]. 兴发pt登录学报, 2020, 37(11): 46-50.
ZHONG Jiacheng, HU Fengrong. A Precision Approach to Optical Power Test . Journal of Jilin Institute of Chemical Technology, 2020, 37(11): 46-50.
链接本文:
http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2020.11.010http://xuebao.jlict.edu.cn/CN/Y2020/V37/I11/46
No related articles found!
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

Shared
Discussed