Please wait a minute...
兴发pt登录学报,2019,36(9):28-34https://doi.org/10.16039/j.cnki.cn22-1249.2019.09.008
本期目录|过刊浏览|高级检索 |
注塑模设计中冷、热流道技术在Moldflow中的比较分析
尹小定1,赵会娟2,王登化1,丁禹轩3
1.江西机电职业技术学院材料工程系;2.济源职业技术学院机电工程系
Comparative Analysis of Cold Runner Technology and Hot Runner Technology in Mod Design Based on Moldflow Software
YIN xiaoding1, ZHAO huijuan2, WANG denghua1, DING yuxuan3
下载:PDF(9597KB)
输出:BibTeX|EndNote(RIS)
摘要

以Moldflow软件为分析平台,以电器过线板的模具设计为例,首先分析了塑件结构的工艺性,然后采用冷、热流道技术进行塑件成型分析。对比两种技术的CAE参数,从结果可知,在注射模具设计中应用热流道技术可采用较低充填熔体温度,显著降低熔体聚合物分解的风险,同时采用热流道技术可以降低因困气和温差导致的气穴和熔接痕的可能性,同时也可减少冷却时间极大地提高了模具生产的效率。整个分析结果在一定程度上为热流道技术在注塑模具设计中的广泛应用提供了理论支持。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
尹小定
赵会娟
王登化
丁禹轩
关键词:Moldflow电器过线板热流道CAE冷流道
Abstract:

Using Moldflow software as an analysis platform , taking an electrical plate of over- wire as a specific case, the plastic part structure was analyzed firstly, then the plastic part was formed and analyzed using cold and hot flow channel technology. Comparing the CAE parameters of the two technologies, then get the results. The application of thermal channel technology to injecttion mold design can use lower filling melt temperature, reduce the risk of melt polymer decomposition significantly, and the application of thermal channel technology can reduce the possibility of cavitation and fusion marks due to gas distress and temperature difference. At the same time, the cooling time can be reduced and the efficiency of die production can be greatly improved. The analysis results provide theoretical support for the wide application of hot channel technology in injection mold design.

Key words:MoldflowElectric passing plateHot runnerCAECold runner
出版日期:2019-09-25发布日期:2019-09-25整期出版日期:2019-09-25
ZTFLH: TP391
引用本文:
尹小定, 赵会娟, 王登化, 丁禹轩. 注塑模设计中冷、热流道技术在Moldflow中的比较分析 [J]. 兴发pt登录学报, 2019, 36(9): 28-34.
YIN xiaoding, ZHAO huijuan, WANG denghua, DING yuxuan. Comparative Analysis of Cold Runner Technology and Hot Runner Technology in Mod Design Based on Moldflow Software . Journal of Jilin Institute of Chemical Technology, 2019, 36(9): 28-34.
链接本文:
http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2019.09.008http://xuebao.jlict.edu.cn/CN/Y2019/V36/I9/28
[1] 赵会娟, 尹小定.MOLDFLOW在优化空调外壳支架注射成型工艺中的应用[J]. 兴发pt登录学报, 2019, 36(7): 24-29.
[2] 赵会娟, 王国栋.基于HSCAE和UG的滑盖注塑模设计[J]. 兴发pt登录学报, 2018, 35(5): 58-62.
[1] WANG Ya-hong, JIA Ying-chao.Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2] PAN Hong-wei, ZHOU Hong-li.Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[3] ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi.Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[4] ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai.The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .
[5] ZHANG Yun-peng.Preparation and Characterization of Er3+Y3+Yb3+Co-doped Al2O3Luminescence Materials[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 58 -63 .
[6] MI Ya-wei.Proof of the Manifold of n Manifold[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 64 -66 .
[7] XU You-zhuan, ZHOU Hou-qing.The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[8] ZHOU Hong-li, ZHANG Yang, CUI Hao, XUE Jian-fei.Primary Exploration of the Applied Pharmaceutical Talents Training in Ordinary Engineering Colleges Based on Social Needs and R ecruitment Drives[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 1 -4 .
[9] YANG Xiu-dong, WANG Ya-hong, ZHANG Pin-mei, YANG Yan-jun, CUI Hao, ZHOU Hong-li.Discussion on the Practice Teaching Reform of Pharmaceutical Engineering Based on Engineering Education Professional Accreditation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 5 -7 .
[10] LI Long, WANG Xue-mei.Research on Higher Education Assessment Mode Based on Formative Evaluation and Information Entropy Theory[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 8 -12 .
Viewed
Full text


Abstract

Cited

Shared
Discussed